Pump Equipment C09

The power and precision of high pressure dosing with dual drive technology, flexible pump head arrangements and optimized valve technology

Pump Equipment C09

Manual

Data sheet

Carino-C09 high-pressure metering pumps offer maximum flexibility and functionality with their dual drive technology and flexible pump head arrangements and an extremely space-saving design.

Decoupled pump heads:

High pressure dosing pumps C09 with decoupled pump head have the same design characteristics and the high functionality of a standard Carino C09.

In the decoupled pump head version, the pump head is separated from the housing by a spacer to reduce the heat transfer of hot fluids from the pump head to the housing, drive technology and electronics.

The power transmission from the stepper motor-driven drive axle to the oscillating pump piston is achieved through a special axle extension.

With this constructive solution, Carino C09 dosing pumps can be used for dosing hot, crystallization-sensitive liquids up to 120 ° C.
eingesetzt werden.

The pump head can be equipped with an insulating hood to ensure a constant temperature of the hot fluid.

Heated pump heads:

Heated high-pressure dosing pumps C09 have the same design characteristics and the high functionality of a standard Carino C09.

In the electrically heatable pump head version, C09 metering pumps can be used for melts, crystallization-sensitive fluids and viscous substances up to 120 ° C.

The pump head is thermally decoupled from the pump housing by a spacer component and axis extension and equipped with an electric heating hood.

In the case of a double pump head version, the capillaries on the outlet side are not connected via a T-piece, but via a material-intensive connecting pipe with an integrated vent screw. Cold bridges with the risk of crystallization, especially in the solidification-sensitive capillaries, can be avoided by the heat content of the connecting pipe.

The regulation of the electrical heating is done with external temperature controller.

Coolable pump heads:

Temperature-controlled high-pressure dosing pumps C09 have the same design characteristics and the high functionality of a standard Carino C09.

With the temperature-controlled pump head version, C09 metering pumps have heating / cooling connections on the pump head and can be operated at temperatures of -10 ° C to + 120 ° C depending on a connected thermostat or cryostat. Process-related media temperatures, for example to avoid crystallization or to avoid evaporation effects during dosing, are ensured.

The pump head is thermally decoupled from the pump housing with a spacer and axle extension and equipped with a heating / cooling jacket on the pump head.

The regulation of the heating or cooling temperature and the temperature control of the pump head is carried out via the connected thermostat / cryostat.

Temperable C09 dosing pumps can be used universally for melts, crystallization-sensitive fluids, viscous substances or also for low-boiling liquids, solvents or liquid gases